Click to enlarge

Engenius-Senao EOC-2610

Features:

• MCU/RF: Atheros AR2316 Single chip
• Memory: 32MB SDRAM
• Flash: 8MB
• Physical Interface:
  • One 10/100 Fast Ethernet RJ-45•Reset Button•One
  • SMA Connector•One switch (external and internal antenna switching)
• LED Indicators:
  • Power/ Status•LAN (10/100Mbps)•WLAN (Wireless is up)•3 x Link Quality (Client Bridge mode)
  • Green: Good Quality
  • Yellow: Marginally Acceptable Quality
  • Red: Bad Quality
• Power Requirements: Active Ethernet (Power over Ethernet) Proprietary PoE design•Power Adapter 24 V/0.8A DC
• Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17
• Frequency Band: 802.11b/g 2.412~2.472GHz
• Modulation Technology:
  • OFDM = BPSK, QPSK, 16-QAM, 64-QAM
  • DSSS = DBPSK, DQPSK, CCK
• Operating Channels: 802.11b/g11 for North America
• Receive Sensitivity (Typical):
  • 802.11g
    • -92 dBm @ 6Mbps
    • -74 dBm @ 54Mbp
  • 802.11b
    • -97 dBm @ 1Mbps
    • -89 dBm @ 11Mbps
• Available transmit power (Average power):
  • Frequency Power
    • 2.412~2.462 GHz IEEE 802.11g
      • 26dBm@6~24Mbps
      • 25dBm@36Mbps
      • 23dBm@48Mbps
      • 22dBm@54Mbps
    • 2.412~2.462 GHz IEEE 802.11b
      • 27dBm@1~11Mbps
    • Tolerance ±1 dBm
• Internal Antenna: Embedded 10dBi Panel antenna
• External Antenna: 1* SMA connector
• Topology: Infrastructure
• Protocol / Standard:
  • IEEE 802.3 (Ethernet)
  • IEEE 802.3u (Fast Ethernet)
  • IEEE 802.11b/g (2.4GHz WLAN)
• Operation Mode:
  • 802.11 b/g
  • Access Point
  • Client Bridge
  • Client Router
• LAN: DHCP Client
• VPN: VPN - pass through
• Wireless:
  • Channel Selection (Setting varies by countries)
  • Transmission Rate
    • 11 b/g:54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5,
    • 2, 1 Mbps
  • Super G : 108 Mbps
  • Long distance transmission : 1km to 30km
  • Transmit power table
  • Signal Strength indication using LEDs
  • PPPoE(CR mode)
• Security:
  • WEP Encryption-64/128/152 bit
  • WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
  • WPA/WPA2 Enterprise (WPA-EAP using TKIP)
  • 802.1x Authenticator
  • Hide SSID in beacons
  • 802.1Q VLAN•MAC address filtering, up to 50 field
  • L2 isolation(AP mode)
  • Wireless STA (Client) connected list
  • Web-redirect
• QoS: WMM (Phase2)
• Configuration: Web-based configuration (HTTP)
• Firmware Upgrade: Upgrade firmware via web-browser, Keep latest setting when f/w update
• Administrator Setting: Administrator password change
• Reset Setting:
  • Reboot (press 1 second)
  • Reset to Factory Default (press more than 5 seconds)
• System monitoring: Status, Event Log
• SNMP: V1, V2c (Phase2)
• MIB: MIB I, MIB II (RFC1213) and Private MIB (Phase2)
• Backup & Restore: Settings through Web
• Time setting: NTP (Auto-setting of time)•Time setting manually
• Temperature Range:
  • Operating: -20°C to 70°C (-4°F to 158°F)
  • Storage: -30°C to 80°C (-22°F to 176°F)
• Humidity (non-condensing): 5%~90% typical
• Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height: 2.17” (55mm)
• Weight: 0.66 lb. (300g)